ERA POLYMERS ER1K60AFG
Item #:
ER1K60AFG
Product Info
ERA POLYMERS
ERAPOL 1K 60A 5-GALLON 44#
60 Shore A Hardness
The Erapol 1K Blocked Series are a range of single component blocked TDI polyester polyurethanes available in a range of hardnesses. To process, simply heat, pour, and cure. The Erapol 1K Blocked Series are low free TDI and do not contain Methylenedianiline (MDA). Air entrapment is a common problem when manufacturing rollers. This can be solved by using the Erapol 1K Blocked Series as they undergo a low viscosity phase early in the cure cycle. During this stage any air bubbles self release,
resulting in bubble free castings.
Advantages of Erapol 1K Blocked Series over conventional elastomers:
- Easy & Efficient processing
- Stable at room temperature
- Single component
- Economical – Minimal wastage due to no mixing or weighing
- No need to add curative
- Cures with heat
- No dispensing equipment required
- Self Degassing – Air bubbles self release in curing process so there is no need for vacuum degassing
The Erapol 1K Blocked Series is ideally suited for the following applications:
- ANTI VIBRATION MOUNTINGS
- GASKETS
- PRINTING ROLLERS
- ROLLERS
- SEALS
This item requires special handling. Additional shipping surcharges may apply.
Rudolph Bros. & Co. DOES NOT GUARANTEE that the information in any related documents is the most up to date information available from the manufacturer, there are times when updated information is released and we are not made aware of immediately.