BETASEAL 43532 QUART 2#

Item #: ES43532QT

Product Info

DDP SPECIALTY ELECTRONIC MATERIALS US, INC.

BETASEAL 43532 Body Primer is a polyurethane based, methylene chloride free, solvent evaporation, and moisture cure type primer. After application to a substrate, this primer has a tendency to drip less than standard primers. BETASEAL 43532 is recommended for use as an adhesion promoter between BETASEAL Urethane Adhesives and automotive paint coatings.



BETASEAL 43532 primer is an integral component of a BETASEAL bonding system. Its suggested use is priming coated automotive body flanges (pinchwelds) before the application of a BETASEAL™ adhesive.


BETASEAL 43532 can be applied by using pressurized dispensing (steam or spray) equipment, pad, brush, or other suitable applicator. Allow the BETASEAL 43532 to dry at room temperature for a minimum of 30 minutes before applying a BETASEAL adhesive. If the primed surface is clean (free of oil, dirt or dust), adhesive can be applied for up to 110 hours after the primer has dried.


12/cs
This item is a Hazardous material, shipping restrictions and surcharges may apply.

Item Specifications

  • 3 lbs per EA

Other Variations of This Item

Out of Stock
UOM : EA

Have Questions?

Ask our experts: