LOCTITE EA 9330 AERO Quart
Product Info
LOCTITE EA 9330 AERO is a two-component paste adhesive, which is easily mixed and has high peel strength. This room temperature cure system has good environmental resistance and bonds to a variety of substrates.
FEATURES OF EA 9330
- Two Component System
- Tolerant of Bondline Thickness Variations
- Room Temperature Cure
- High Peel Strength
- Excellent Environmental Resistance
Applying
Bonding surfaces should be clean, dry and properly prepared. For optimum surface preparation consult the LOCTITE Surface Preparation Guide. The bonded parts should be held in contact until the adhesive is set. Handling strength for this adhesive will occur in 24 hours @ 77°F/25°C, after which the support tooling or pressure used during cure may be removed. Since full bond strength has not yet been attained, load application should be small at this time.
Curing
LOCTITE EA 9330 AERO may be cured for 5 to 7 days 77°F/25°C to achieve normal performance. Accelerated cures up to 200°F/93°C (for small masses only) may be used as an alternative. For example, 1 hour 180°F/82°C will give complete cure.
View Accessories
Item Specifications
-
3.00 lbs per EA